Drawing Program for Apple Computer.
Can anyone please recommend a simple drawing package which will run on an Apple computer. 2D and 3D capability required but perhaps this will need 2 separate packages. I have been using Autosketch for some time but this has to run on a Windows emulator which is a pain.
I am aware that this post is more suitable for a forum but cannot find forums on our present web site. Assistance would be most welcome.
Bob Lilley
Michigan is finally finished and doesn’t it look splendid now it has the detailed step with handrails and buck-eye coupling bolted in place. All Bells and “Whistles” have been added – yes original sounds can now be produced at the flick of a switch
Spot the model!
Many people have taken part in the project and I thank them all for their help, support and encouragement but I think three areas of work should be picked out in particular for their contribution to making such an excellent looking model and the fine detailed work achieved by our members.
Andy Harding has done a tremendous job with the curved front and the detail he has managed to include. All made out of an old washing machine in the true spirit of model engineering. Take a close look next time you see it.
The paint job and lining, done by Gerry Fletcher and Arthur Clark, has taken hours of rubbing down and work to get such a splendid finish with such attention to detail and meet the very high standard they set themselves.
This picture show Terry Phelps putting the finishing touches to the handrails and lettering which he has designed built and fitted and plays such a major part in adding the realism when compared to the original locomotive. Terry was also responsible for stitching the three parts together to make a strong and serviceable body.
No doubt many members will get a lot of enjoyment and take pride in driving Michigan round the track. When you do spare a thought for the hours of work put into the project. by so many members.
I thought daisy cutters had something to do with cricket but here we have a new slant.
The ground staff at Ashton Court recently took delivery of a new super -duper grass cutting machine and the grass certainly looks much better for it.
Today we had a splendid display of daisies on the tunnel bank and Alan Grinstead our chief groundsman and tractor driver is cutting the gras and as far as possible avoiding the daisies. They really do look splendid despite the rain and would look even better in sunshine.
Michigan was taken into service today 19 th April and ran trouble free all afternoon. A good crowd turned up for this auspicious occasion – 1800 rides. A number of members had a drive and all were very happy with the performance. No major problems. Two dummy axle boxes fell off and are somewhere round the track – perhaps the golf ball hunters will come across them. I managed to knock a horn off putting the loco back in the carriage shed. Please note it is now clear that when it is put away in the carriage shed, it has to go on the road adjacent to the walkway or it fouls the cross structure of the lift.
Mark and I looking a bit worried about our new baby being out in public for the first time
Our new driver – we like to get them young. It just shows how easy it is to drive
Tim Hims came along to join in the action
We took Michigan out into the sun today. Doesn’t she look good and a credit to all the members who have done so much work on the hand rails, painting and today Mark and Gerry applied the numbers and letters previously prepared in line with the original by Mark.
Despite standing all over the winter she started readily in true Honda fashion and was driven by several members who commented on the ease of driving and power available. In principle she is ready for the new season but I think we will wait until all bits are added including the font deck and steps before introducing her to the public.
I have to say I am delighted with the finished (almost) product. If she goes as well as she looks, and I have no doubt she will, she will do us proud and be a great new asset for the Society.
Meanwhile “One Match Frank” was enjoying his day.
On Friday the final track connection was made by the line gang and the first locomotive driven into the maintenance shed for it’s annual service and inspection.
The Main Team – (most of it)
Colin, Alan and Don have been working away digging a trench forming the track bed, making and laying the track and making and erecting a point from the existing siding. On Friday assisted by the “tractor gang” the ballast was packed down, final connection made, the work was completed and Telford driven into the shed. Just in time for the winter maintenance.
Team plus Tractor Gang and Workshop Manger
Telford now awaits it’s annual service and inspection. It will be much easier parked in the maintenace shed with tools and bench available rather than as previously working outside exposed to the elements loosing nuts in the grass.
Telford awaits Annual Service and Inspection in the warm and dry.
Last year we had an excellent evening discussing and showing various Electric Locomotives of all shapes and sizes. Please bring along and show your electric locomotive of any gauge from N Gauge to Full Size, you must have one somewhere even if it is only the one that runs round the Christmas Tree. All will be most welcome and we can discuss any queries you may have.
We should have Michigan body on show – the chassis is a bit of a lump – and can talk about the latest development in this exciting project which may well set a new standard for 5″ gauge locos just as we did with Telford in 7 1/4″ gauge.
This is one of the members locos which will be on display
See you all on November 19th – Come along with your loco and make a Good Evening into a Great Evening
Bob Lilley
You may remember that at the back end of 2012 we hosted a rally for Polly Owners. This was organised and hosted by Colin Ball and he has just discovered that his dentist was at the rally and produced a video. Just goes to show that having a tooth out is not all bad news!!
Click on the link below to share the fun.
My last blog was before the exhibition where Michigan was on display and I have to say it created considerable interest. At that time I had decided on modifications which I hoped would share the load between battery and engine but they had not fitted or tested on the track.
This picture shows the green resistors mounted at the front behind the fan because they will be dropping a bit of load and may get quite warm. They should reduce the alternator output at high currents which will maintain the load on the engine comfortably below its rating.
New batteries were also fitted. Previously we had been using old discarded golf buggy batteries in the belief that the engine would do all the work and that these old batteries should be sufficient. However it seems that he batteries were completely dead and now that we wanted the batteries to share the load we fitted new lead/acid motorcycle batteries
With some trepidation we wheeled Michigan out, hitched up some carriages, started it up and a few of us set off. To everybody’s delight it performed exactly to plan. Plenty of power when pulling away with very little slip because it is quite a heavy loco. Then, on opening the throttle, away it went to speeds well in excess of normal running with no strain on the engine. Observing the alternator output current and controller input voltage it could be seen that the full 28 volts were maintained until 12A and they then tailed off down to battery volts of some 25v when the battery started to assist. At no time was the engine under any undue strain. When we slowed or came to a halt the ammeter showed that the alternator then proceeded to charge up the battery back up to it’s initial state. All exactly as planned.
We decided it was time for a full trial so we loaded it up with 9 of our heavier members, which together with the trucks I calculated to be about 1 ton, and off we went. It sailed round like a dream and so we continued for two full laps at speeds I felt would not frighten our chairman unduly but again well above those required during normal passenger running. On completion we all congratulated ourselves and I continued running to check further items and make sure everything was going to plan.
I then realised that I had not taken a photograph of this historic event but was delighted to receive by email that evening a photograph taken by Andrew Harding’s good lady who was waiting for Andy in the car park and here it is. Thank you Mrs H.
Gerry and Arthur are now proceeding on the preparation of the body. Two coats of primer have been sprayed on followed by the final coats of green and yellow. Some rubbing down and polishing is now necessary before the red stripes are applied and we can then start fitting all the knobs and whistles which will make it look like a real model engineering locomotive.
Just in case you have forgotten, this is how it will finally look.
Latest news of Michigan is that the body is now in one piece. Terry and helpful Neighbour have welded together the three parts with locating pins which allow it to be easily dropped onto the chassis. Terry has also fitted a return at the rear to house the control panel and removed the suprlus vents which have been worrying Mark no end.
Mike Keighley has been busy adding dummy mdf suspension on the rear bogie whilst the front one is in his workshop hence the wooden block. Don’t worry the axle boxes will be painted black.
Meanwhile Andy Hardy has been working on the curved front which will incorporate the headlight and support the bell and hand wheel. This a real work of art incorporating bits of a washing machine etc – real old fashioned model engineering
Meanwhile new batteries have been obtained together with a new ammeter and stabilising resistors. All will be ready to go after the exhibition and we look forward to further trial runs at Ashton Court. We have decided against powder coating because of the logistic of matching the colour when new parts are fitted and the need for bare metal etc. Ride on Railways get a good finish on their models using acrylic and we will be seeking advice from them at the exhibition.
We will be exhibiting the loco, showing work in progress, at the exhibition and look forward to seeing you all when I can explain the detail and answer any questions – See you there.
Bob
Footnote – Just finished my 7 1/4″ Gauge Beattie Well Tank ready for the exhibition and cannot resist giving you a preview. What will I do with myself now?